Appendix A.

Table of Dimensional Requirements for Base Zoning Districts*

Dimensional Requirement A-1 R-7A R-10A&R-10M CB CG CL RH BC I G/I MXW
Minimum District Size -- -- -- -- -- -- 50 Acres     -- -- The MXW is a unique base zoning district created specifically to facilitate the type of development envisioned for Easton Point and the Port Street Corridor. Please see Section 28-312 for the complete set of regulations for the district, including Table 312 B, which summarizes the development standards for each of the three sub districts comprising the MXW zoning district.
Minimum Lot Size 1 Acre 7,500 sq. ft 50% of lots in SD may be smaller. 75% of these must be 5,000 sq. ft. or greater 10,000 sq. ft. In R-10A 50% of lots in SD may be smaller. 75% of these must be 7,000 sq. ft. or greater 5,000 sq. ft. 20,000 sq. ft. 60,000 sq. ft.

10,000 sq. ft. 40,000 sq. ft. 40,000 sq. ft. 40,000 sq. ft.   
Minimum Building Envelope -- 60’ deep x 30’ wide 55’ deep x 30’ wide 20’ deep x 30’ wide 20’ deep x 30’ wide -- 60’ deep x 40’ wide 30’ deep x 80’ wide 30’ deep x 80’ wide --    
Maximum Density 1 du/ac 3.5 du/ac SF;8 du /ac MF; 2 du/lot duplex 3.5 du/ac SF; 5 du/ac MF; 2 du/lot duplex 7.0 du/ac SF; 16 du/ac MF; 2 du/lot duplex -- -- --         -- 20 du/ac    
Minimum Frontage 30' 30' 35' 30' 60' 200' 60' 100' 100' 100'    
Minimum Setbacks                                                     
Front 50' from accessways and navigable waters; 8' otherwise 15' 15' Existing or 25' 25' 40' 30' 40' 25' 40'    
Rear 50' from accessways and navigable waters; 8' otherwise 25' Setback** 30' Setback** Existing or 15' 15' 15' 15' 30' 30' 30'    
One Side 50' from accessways and navigable waters; 8' otherwise -- -- 0' -- -- --      -- --    
Both Sides 50' from accessways and navigable waters; 8' otherwise 8' 8' 0' 10' 10' 15' 10' 10' 15'    
Maximum Lot Coverage 100% within Building Envelope; 10% outside 100% within bldg. envelope. No more than 50% of rear yard area outside of building. envelope.; must be located between side setback lines 100% within bldg. envelope. No more than 50% of rear yard area outside of building. envelope.; must be located between side setback lines 90% 50% 35% 40% 50% 50% 50%    
Maximum Building Size -- -- -- 25,000 sq. ft.*** -- -- --       -- --    
Maximum Height 35' 35' 35' 60' 50' 50' 110' 35' 40' 50'    

*  This Table summarizes the development standards of the Base Zoning Districts only.  For Overlay and Floating Zone Standards, please see the appropriate Article of the Zoning Code.

**Garages and parking stalls shall be setback a minimum of 15' from the centerline of any alley.

*** These limits may be exceeded by Special Exception

NOTE:  many uses are subject to supplemental standards which may include special dimensional requirements.  please consult section 28 – 1007 for such standards